Privacy Policy
Privacy Notice
We
know that you care how information about you is used and shared, and ...More
Return Policy
You may return most new, unopened items for a full refund within 30 days of delivery. These items ...More
Terms of Use
TERMS AND CONDITIONS OF USE Welcome to our online store. We are pleased to provide you with the ...More
D-2 POWER VENT (Raypak)
|
|||
 |
RayPak 2010 |
||
- Description
- Notes
- Request a Quote
- Send to a Friend
Compatible for indoor or outdoor installation. For use with all Raypak Digital models.
Certified: The D-2 Power Vent assembly is tested and certified to the latest edition of the American National Standard ANSI Z21.56 for pool heaters.
Through the Wall Capable: The D-2 Power Vent assembly is a Category III mechanical draft venting system that operates with a positive vent static pressure and with a vent gas temperature that avoids excessive condensate production in the vent. All sizes are capable of relieving flue gases up to a maximum of 100 equivalent feet of vent length. All models have a 4” diameter exhaust connection.
Multi-Position: Using the supplied adjustable 90° elbow, the flue gases may be discharged in any direction (see D-2 Power Vent manual for details). Or simply remove the elbow for vertical venting.
Dual Voltage Induced Draft Blower (120/240 VOLT): Factory set for 240 volts. Can be rewired in the field for 120v operation.
Safety at Its Best: The D-2 Power Vent is equipped with a draft proving switch. This switch ensures that the blower is operating before operating your heater. It is also equipped with a solid state control that allows the blower to purge any residual gas buildup in the heater after the heater has shut down.
Certified: The D-2 Power Vent assembly is tested and certified to the latest edition of the American National Standard ANSI Z21.56 for pool heaters.
Through the Wall Capable: The D-2 Power Vent assembly is a Category III mechanical draft venting system that operates with a positive vent static pressure and with a vent gas temperature that avoids excessive condensate production in the vent. All sizes are capable of relieving flue gases up to a maximum of 100 equivalent feet of vent length. All models have a 4” diameter exhaust connection.
Multi-Position: Using the supplied adjustable 90° elbow, the flue gases may be discharged in any direction (see D-2 Power Vent manual for details). Or simply remove the elbow for vertical venting.
Dual Voltage Induced Draft Blower (120/240 VOLT): Factory set for 240 volts. Can be rewired in the field for 120v operation.
Safety at Its Best: The D-2 Power Vent is equipped with a draft proving switch. This switch ensures that the blower is operating before operating your heater. It is also equipped with a solid state control that allows the blower to purge any residual gas buildup in the heater after the heater has shut down.
Factory Wired for 240v